HANGING ACCESSORIES AND PICTURE RAILS
Hanging rails - U section
20/10th steel hanging section, epoxy painted, pre-perforated, approximately every 30 cm.
Height, width, thickness
Height : 22 mm, width : 9mm, thickness : 2 mm
Each rail is supplied with steel screws and a small pot of paint for retouching.
List of colours for hanging rails :
BN/White, BC/off-white, IV/Ivory, AL/Alu
4/4 hanging rod
Complement to the U section, the hanging rod is plainly design and fits into any kind of environment - 4x4 mm square section rod, epoxy painted.
List of colours for hanging rails :
BN/White, BC/off-white, IV/Ivory, AL/Alu
Hooks for 4/4 rods
The strength of these hooks varies depending on the modem, going from 10 to 45 kg of weight carried and the are perfectly suitable for use with the 4/4 hanging rod.
Ref. C520 Aluminium hook, weight carried strength: 10 kg.
Ref. C521 Brass hook, weight carried strength: 25kg
Ref. C522 Brass hook, weight carried strength: 40kg
High strength 11/4 hanging rod
Rigid, strong steel rod, designed to carry large format paintings and heavy objects. 11 x 4 mm section - epoxy paint.
Ref. TAR100 11/4 hanging rod, length 1.00 m
Ref. TAR150 11/4 hanging rod, length 1.50 m
Ref. TAR200 11/4 hanging rod, length 2.00 m
List of colours for hanging rails :
BN/White, BC/off-white, IV/Ivory, AL/Alu
Hooks for 11/4 rods
Solid brass hook, weight carried strength : 100 kg.
Ref. C523
CLIPRAIL MAX
Strength 25 kg per metre
Theis system fits in with your needs and will also stick right onto your ceiling. It actually includes an additional indentation which masks the usuak empty space between the rail and the ceiling.
CLIPRAIL HANG & LIGHT
Strength 45 kg per metre
The luminous Cliprail is a revolutionary hanging system. The firs electrified hanging solution where the light fittings can be fastened and adjusted in the blinking of an eye/
REPAIR AND MOUNTING PRODUCTS
Special hinges
Hand-made Japanese paper - 100% Kozo? This very high quality paper comprises a whole host of «waterlines» which are parallel lines where the Kozo pulp is less dense. The restorer uses a damp fine brush which he passes accross this waterline. The humidification will make it easy to detach a strip which will then be used as a hinge for assembling documents. These lines run parallel to the short side, the spacing is of variable widths thus making it possible to obtain strips of varying widths which the restorer will choose depending ont the work he is doing.
Mini-adhesive dispenser
This handy, ergonomic mini-dispenser is small and light, allowing you to place a small double-sided adhesive rectangle. It means that documents can be neatly, cleanly and quickly stuck onto a medium, including sticking photographs onto album pages : 2 or 4 adhesive rectangles are enough to provide durable mounting. Uses a permatent, acid-free acrylic adhesives which complies with the PAT.
When kept within reach it quickly becomes an essential tool used for all common spot gluing jobs.
Contains 650 rectangles of double-sided adhesive, format : 12 x 8 mm.
Individual blister packs.
Dispenser for 650 adhesive rectangles
STAINLESS STEEL PATULAS
Spatulas made entirely of stainless steel, high quality tools essemtial for the work of the restorer.
Crepe gum
In its natural state, rubber comes in the form of a milky liquid known as latex.
This liquid is then filtered and undergoes various processes until we obtain this sheet of crepe commonly used in the shoemaking industry.
It also has an application in the graphical fiels where it is used as an effective gum for removing residues of adhesives.
Sachet of 6
Format : 5 mm x 5 mm
SURIKOMI-BAKE
Hand-crafted Japanese brushes. Manual assembly with no metal link thus preventing any possibility of oxidation - bamboo handle - A very fine series of brushes in the purest Japanese hand-crafted tradition – A series of 8 brushes ranging from 3 mm to 30 mm and available in 2 hair qualities: Fawn colour: a mixture of stag and horsehair which is soft and flexible to the touch, ideal for delicate dust removal or pasting work. Speckled black: a mixture of pig’s bristle and stag’s hair which is harder to the touch and more suitable particularly for smoothing after pasting or for work with paper pulp when filling in gaps.
MATERIALS, EQUIPMENTS AND MACHINES
NILFISK GWD320
NILFISK VIKING GWD320 water liquid suction tube.Compact, handy and manageable it has the same suction variation block as the
GD1005, which is well-known for its excellent performance and reliability.
The block is independent of the device so it can be fixed onto a table.
This model has been designed to suck up only liquids.
It is the essential complement to the TADM suction table on page 78.
Tinyview Plus
Temperature and RH recorder (-30 to +50°C – 1 to 100% RH)This recorder sensor has an LCD screen which displays the temperature, humidity and alarm conditions instantly. The data can be exploited using the Tinytag Explorer software application running in Windows.
Small format: overall format is less than 90 mm, light: 85g, discreet: light grey – it fits naturally into enclosed spaces such as exhibition display cases in museums, archives and libraries.
It allows you to monitor the thermo-hygrometry.
SPECIFICATIONS:
capacity: 30,000 readings. Programmable polling intervals
2 alarm programs. Programmable delayed start
3 shutdown options. Manages minimums and maxi mums
polling interval 1 sec to 10 days
lithium battery
temperature: -30 to + 50°C
resolution: 0.5°C
humidity: 0 to 100% RH
capacitive type sensor
resolution: 0.5% RH
sensor accuracy: +/- 3% at 25° C
THE STARTER KIT COMPRISES:
1 sensor REF: TV1501 + PC serial port connecting cable + Tinytag Explorer software application.
Tinytag Thermo-hygrometer
This light, handy thermo hygrometer allows you to take humidity and temperaturemeasurements when required.
The data is displayed on the LCD screen.
The special feature offered by the TINYTAG thermo hygrometer is that it can be
used as a genuine data centre which can be run on a Windows PC using the
Tinytag Explorer software application (supplied as standard)
u (Ref. TH2500)
Specifications:
• reading capacity: 32.000
• operates from -20 to + 50° C and from 1 to 100% HR
• can operate either alone or as a recorder of data exploitable with the Tinytag
Explorer software application
• measures the temperature and the relative humidity
• battery low indicator
• runs on 2 standard AA LR6 batteries
• shipped with the Tinytag Explorer software application
• 1 PC serial port cable
Optional: USB cable
Special surface measurement pH metre
To measure the pH on a surface simply, quickly and accurately, the HI99171 is supplied with a special pH electrode with a flat end so that it has a wide surface of contact with the sample.Sturdy, waterlight portable case. Surface pH electrode with flat end. Easy and quick to calibrate with 2 series of buffers recorded in the memory. Easy to use.
Accuracy: ±0.02 pH. A value can be frozen on the screen. Battery self-check and
screen on start-up, switches itself off after 8 minutes when not in use.
• Measuring range from -2.00 to 16.00 pH.
• Temperature probe from -5.0 to 105.0° C.
The HI99171 is shipped in a carry case with a HI1414D pH electrode, pH 4 and
pH 7 buffer solutions, cleaning solutions, a sample preparation solution and bat-
teries.
Portable digital luxmeter HI 97500 model
The quality of the light in the workplace is essential in museums, archives and libraries. Insufficient light can affect human performance. A light, compact, watertight case. Very simple to use. 3 measuring ranges. High performance lightsensor with 1.5 m cable. The 97500 is shipped in its case with battery.
Specifications :
Range : 0.001 - 1.999 Klux ;
0.01 - 19.9 Klux ;
0. 1 - 199.9 Klux
Resolution: 0.001 Klux ;
0.01 Klux ;
0.1 Klux
CROSSWELD MODEL 2
Polyester welding machine, allowing cross-welding (e.g. for producing sleeves with various divisions). The table’s grid using white on a black background makes it easier to get your bearings when producing sleeves divided into compartments.The weld length for large formats (posters, drawings, maps) can be obtained by moving the whole of the «material to be welded for the document» along the weld
arm.
• Timer which can be adjusted from 1 to 10 seconds allowing polyester films of from 12 to 350 microns to be welded.
• Weld length: 700 mm continuously.
• Weight: 70 kg.
• Power supply: 220 V.
FUNITURE
Premier Prix horizontal map cabinet
Single-unit horizontal cabinet with sheet metal top. Unit of 5 drawers with built-inrunning handles. Chrome-plated label holder and security lock. A0 format.
Optional: Leg assembly made of epoxy steel sheet.
Colour: white, black, light grey.
Horizontal cabinet with 8 drawers
Horizontal cabinet with 8 drawers made of epoxy sheet. Label holder. Running handles. Block of 8 drawers only (no top). Effective drawer height: 3 cmOptional: Top made of epoxy steel sheet.
Base made of epoxy steel sheet.
Leg assembly made of epoxy steel sheet.
Colour: white, black, light grey.
Horizontal cabinets with 10, 20 or 30 drawers
Horizontal cabinets with 10, 20 or 30 drawers made of epoxy steel sheet. Label holder.Running handles. Effective drawer height: 2.6 cm
Optional: Top only made of epoxy steel sheet.
Base only made of epoxy steel sheet.
Colour: white, black, light grey.
Horizontal cabinet with 3 high capacity drawers
Cabinet made of epoxy steel sheet.Unit of 3 drawers with an effective height of 16.5 cm.
30 kg effective load per drawer.
Drawers with chrome-plated handles.
Chrome-plated label holder and security lock.
Optional: Base made of epoxy steel sheet.
Colour: white, black, light grey.
CD/DVD cabinets
Metal horizontal cabinet• epoxy paint
• specially designed for archiving CDs and DVDs.
• 2 drawers sliding on rails with protected ball bearings
• there are stops which prevent the drawers from being accidentally taken out.
• module of 2 drawers with a security lock which locks both drawers.
Gripping handle over the length of the drawer, 5 adjustable dividers for the perfect way of storing CDs and DVDs. Holds approximately 500 CDs.
Colour: white, black, light grey.